888-786-9299

Setting Up Your 10′ Telescopic Stand

Click here to view and purchase in our estore

Red Carpet Runway brings the Red Carpet Experience to Your Event and Party! With each one of our Custom Backdrop and Carpet Packages you have the option of purchasing the ‘Professional’ version which includes one of our Professional Grade Step and Repeat Stands. We call these ‘Professional Packages’ because of the professional and seamless appearance of each red carpet backdrop as it hangs on the stand as well as its versatility to be placed and moved around as your event needs change.

Our 10′ Retractable is available in black and is sold with our Hollywood Package and can be used to hold up custom Step and Repeat Backdrops 5ft to 10ft wide. You can set up your custom backdrop stand in 8 easy steps below. Each 10′ Retractable Stand comes with everything you need to set it up for your custom backdrops and even includes its own carry bag with compartments so that you can safely store all hardware.

10' Stand Materials

10′ Stand Materials

Step 1
Assemble the telescoping uprights and the feet using the supplied screws and screw driver

Step 1. Assemble the telescopic uprights and the feet using the supplied screws and screwdriver.

Step 1. Assemble the telescopic uprights and the feet using the supplied screws and screwdriver.

Step 2
Align mounting holes to face the flat sides of the feet

Step 2. Align mounting holes to face the flat sides of the feet.

Step 2. Align mounting holes to face the flat sides of the feet.

Step 3
Assemble the top, bottom and middle stability poles respectively. Top and bottom poles can be identified by stickers near shaped ends.

Step 3. Assemble the top and bottom poles respectively. Top and bottom poles can be identified by stickers near shaped ends.

Step 3. Assemble the top and bottom poles respectively. Top and bottom poles can be identified by stickers near shaped ends.

Step 4
Slide the graphic over the loose ends of top and bottom poles as shown below.

Step 4. Slide the graphic over the loose ends of top and bottom poles as shown above. Prepare the holes for central upright ends before graphic application. Recommended gole size: 26-30mm.

Step 4. Slide the graphic over the loose ends of top and bottom poles as shown above. Prepare the holes for central upright ends before graphic application. Recommended gole size: 26-30mm.

Step 5
Attach the top pole to one of the uprights as shown below, tighten up the thumb screw

Step 5. Attach the top pole to one of the uprights. Tighten the thumb screw.

Step 5. Attach the top pole to one of the uprights. Tighten the thumb screw.

Step 6
Tighten up the thumb screw to make sure the top and bottom poles are securely assembled

Step 6. Tighten up the thumb screw to make sure the top and bottom poles are securely assembled.

Step 6. Tighten up the thumb screw to make sure the top and bottom poles are securely assembled.

Step 7
Adjust the height of the telescopic uprights to get good tension of the graphic

Step 7. Adjust the height of the telescopic uprights to get good tension of the graphic.

Step 7. Adjust the height of the telescopic uprights to get good tension of the graphic.

Step 8
Stretch the central upright to the same height as graphic. Insert the top supporter into the hole to hold the top pole.

Step 8. Stretch the central upright to the same height as graphic. Insert the top supporter into the hole to hold the top pole.

Step 8. Stretch the central upright to the same height as graphic. Insert the top supporter into the hole to hold the top pole.

Step 9
Insert the bottom supporter of central upright into the bottom hole of graphic to hold the bottom pole. Tighten up the thumb screw.

Step 9. Insert the bottom supporter of central upright into the bottom hole of graphic to hold the bottom pole. Tighten up the thumb screw.

Step 9. Insert the bottom supporter of central upright into the bottom hole of graphic to hold the bottom pole. Tighten up the thumb screw.

Step 10
Step and Repeat Setup Complete! Get Ready to Pose!

Step 10. Finished

Step 10. Finished

Click here to view and purchase in our estore

 

Download the PDF Instructions below
10’_Stand